If you are sick and tired of the ever-rising fuel and environmental pollution, it may be the right time to have a diesel engine conversion for your Wrangler.
Performing a diesel engine conversion on your Jeep Wrangler will let your standard diesel engine rely less on regular fuel and more on biomaterial, available in form of animal or plant oil.
By using this biodiesel, you will reduce environmental pollution while still saving some money. The first vehicle to utilize biodiesel appeared publicly in 2005.
Since then, the popularity of these environmental and budget-friendly vehicles has been on the rise. In this article, we will discuss the Jeep Wrangler diesel conversion cost and learn some biodiesel basics.
What is Biodiesel?
Biodiesel refers to fuel made from plant and animal oil as opposed to fossil fuels. Unlike fossil fuels, biodiesel is a clean-burning fuel made via a process known as transesterification.
Mixtures of biodiesel can work in a diesel engine for a cleaner environment and help you save a few bucks. Biodiesel usually comes in a percentage form; for instance, B50 biodiesel is a mixture of 50% of the regular fuel, and 50% is the amount of organic oil.
Is It Easy to Convert a Wrangler into Diesel?
Yes, it’s easy to convert a Jeep Wrangler into biodiesel. If you have finally made up your mind to go on the biodiesel route, you don’t have to worry as there are no significant mods required on the engine.
Most diesel engines on Jeep Wrangler can run efficiently on biodiesel as well. In fact, any diesel car is biodiesel ready. You don’t have to use the costly third-party kits in your engine.
However, some older vehicles may need a special filter to clean the biodiesel and make it ideal for the engine. There has been a hot debate surrounding biodiesel engines and whether they are actually beneficial in terms of mileage.
The truth is, biodiesel can save up to $2000 per year for Wrangler drivers. But the real advantage comes in the form of less environmental pollution.
Jeep Wrangler Diesel Conversion Cost
The cost of converting a Jeep Wrangler Diesel varies depending on various things, such as the parts and service your vehicle requires.
It will also depend on whether you make the project a DIY or have a specialist do the swapping for you. Generally, the average Wrangler diesel conversion cost can range from as less as $1000 way up to $10,000.
Depending on your experience, it’s easy to convert your diesel engine in a few steps. You just have to find all the parts needed for the conversion.
Things you need for you to do a Jeep Wrangler Conversion:
- Engine accessories like pumps, manifolds, intake, generators, exhaust, and ducting
- Fuel delivery including tank, lines, sending unit, and delivery pump
- A cooling system composed of radiator, fan, intercooler, and shroud
- Electronics such as a battery, control module, and wiring harness
- Powertrain including transmission, drivelines, upgraded joints, gears, and mounts
The good thing about a Jeep Wrangler conversion kit is that it comes fully packed with the extra parts needed. To do the conversion, you will need two-vehicle garage space and make sure that its well ventilated. Once you buy everything needed, you can now proceed to the conversion process.
How to Convert a Jeep Wrangler Diesel Engine (DIY Project)
Remove the older parts to install the new ones by following these instructions:
- Unplug the coolant hoses, oil lines, and fuel
- Disconnect the wiring harness and mark the locations of connectors
- Unfasten the transmission bell and torque convertor
- Support the engine by holding it with a crane and chain
- Open the motor mounts and remove the motor
- Remove all the other parts you don’t need anymore.
Once you are done with the removal work, go on to the installation project.
- Measure and incise the excess fender and firewall to create space
- Install your updated drivelines and transmission
- Lower your engine and set it on new mounts
- Install the new accessories, electronics, and hose in reverse order from removal.
When you are done with the installation, ensure that the last bolt is tight, and then add fluids to test your motor. If you are not confident enough to handle the whole project, you can feel free to seek professional mechanic help.
Conclusion
Converting your Jeep Wrangler is a cool idea that will help improve your fuel economy and reduce the environment.
