Starting your car is something you probably do multiple times a day. You turn the keys, press the gas pedal, and, ideally, your car will start right up. If this isn’t what happens when you turn your key, though, there could be a few different things wrong. With so many different things to look at when this problem occurs, how do you know which piece of information is the source of the problem? Fortunately, this article will address why your jeep renegade is not starting, read on.
What Causes Jeep Renegade Not to Start
1. Dead/failing Battery:
A dead or failing battery can cause your Jeep to not start. If you recently replaced the battery and it is less than 3 months old, this is likely the problem. The first thing to do is take a voltmeter and check the voltage of the new battery with the engine off and then again with the engine running. If the voltage drops significantly (more than 0.5V) when starting, this indicates that your battery has failed and needs to be replaced
2. Failing starter:
The starter motor is responsible for turning over the engine when you turn the key in your Jeep Renegade. If there are any issues with your starter, it may not be able to get your Jeep going again after being stalled out. This could be caused by a bad starter or even an issue with your ignition switch itself if it isn’t getting enough power from somewhere else in order to engage properly
3. Alternator issues:
If there are no other problems found related to your battery or starter motor, then there could be an issue with your alternator causing a power shortage in your car’s electrical system. The alternator provides an electrical current to run all of your accessories such as lights and radio while also charging up your battery whenever it’s running so that you can start your car later on. If the alternator isn’t working properly, then you’ll find yourself with a dead battery and no way to get going again until the problem is fixed
4. Battery terminal issues:
Another common issue related to car batteries is the improper attachment of cables when installing or replacing them. If the battery terminals are loose or corroded, then there will be an issue with the current flow. This can cause a power shortage in your car’s electrical system and prevent it from starting up again.
5. Wiring issues
faulty wiring can cause all kinds of electrical problems including poor starting, no power at all, or intermittent electrical problems such as lights flickering when you turn on the ignition switch or a loss of power steering assistance when you turn on the ignition switch
What to Do if Your Jeep Renegade Won’t Start?
Jeep Renegade owners may experience difficulty starting their vehicle. If this is the case, there are a few things that can be done to troubleshoot the issue.
First, make sure that the battery is properly charged. Try starting the vehicle without the battery first, and see if the engine starts. If the engine does not start, the battery may not be sufficiently charged.
If the battery is properly charged, another possible issue is with the starter. Try starting the vehicle with the key in the “start” position and then press the gas pedal. If the engine starts, the starter may be defective. If the engine does not start, the starter may need to be replaced.
If the starter is not the issue, the next step is to check the fuel systems. Make sure that there is enough fuel in the tank and that the fuel lines are not blocked. If the fuel lines are blocked, the fuel may not be able to reach the engine. In this case, the vehicle may need to be serviced.
If the fuel systems are not the issue, the final step is to check the battery cables. Make sure that the cables are not loose or damaged. If the cables are damaged, the battery may not be able to provide the necessary power to start the engine. In this case, the battery may need to be replaced.
If the battery is not the issue, the issue may be with the engine. If the engine does not start, the issue may be with the fuel system, the battery cables, or the starter. In this case, the vehicle may need to be serviced.