The Jeep Grand Cherokee 5.7 HEMI is a mid-sized SUV from Jeep with a potent engine under the hood that packs some nice punch. If you are thinking to yourself, I don’t want just any car, I want the fastest possible 0-60 time, then this might be right up your alley. So let’s get into it
What is the 5.7 hemi engine?
The 5.7L Hemi engine is a V-type 8 cylinder engine. The 5.7L Hemi engine is commonly referred to as the 345 Hemi due to the fact that it has 345 cubic inches of displacement. This engine was first introduced in 2003 on Dodge trucks and SUVs. The 5.7L Hemi has a displacement of 5654 cubic centimeters, or 345.5 cubic inches using the standard US measure of cubic inch displacement.
The 5.7L hemi is not just a name for any hemi engine with a displacement of 5654cc, instead it is an actual name for the specific engine used in Dodge vehicles. The origin of the name comes from the fact that this particular engine uses a hemispherical combustion chamber design
How fast is the 5.7 Hemi Grand Cherokee? (0-60)
If you want some real power under your hood, then you’ll want to stick with a 5.7 Hemi V8 engine. This type of engine is typically found in the Overland trim level. This engine produces 360 horsepower and 390 lb-ft of torque that’ll get you from 0-60 mph in 3.5 seconds.
The 5.7 Hemi produces a respectable 360-horsepower and 390 lb.-ft. of torque. However, the engine is not all that matters when it comes to acceleration. The Jeep Cherokee is a heavy vehicle, so it takes a lot more power to get this SUV up to speed than it would take a smaller car.
For example, the Honda Accord with its 3.5L V6 engine only produces 278 horsepower but can accelerate from 0-60 in just over 6 seconds while the Cherokee takes nearly 8 seconds to reach 60 mph even though it has 82 more horsepower than the Accord.
Is the Jeep 5.7 a good engine?
The 5.7 Hemi is a good engine due to its reliability and power. The 5.7L Hemi engines are known to last around 250,000 miles with proper maintenance. They are also quite powerful for their size and can produce up to 400 horsepower and 410 lb-ft of torque in the most recent incarnations.
The 5.7L Hemi is one of the most commonly used engines in high-performance vehicles built today. It was designed and produced by Chrysler as part of their long line of Hemi engines which have been used in many of their trucks, vans, SUVs, and other cars over the years.
One of the reasons that this engine is so widely used by so many people is because it is extremely reliable and durable, especially when compared to other brands and models of similar engines. The 5.7L is also very flexible and can be used in a wide range of applications without much trouble at all which makes them very versatile as well as powerful and reliable
What is the life expectancy of a 5.7 Hemi?
The average life expectancy of the 5.7L Hemi is between 250,000-300,000 miles. The 5.7L engine, commonly known as the Hemi, has a bad reputation for early failures caused by a defect with the right cylinder head that causes exhaust valves to burn and fail. This defect was corrected after 2007, improving the life expectancy of later models.
Conclusion
The Grand Cherokee has only gotten better over the years, and for those looking to take a road trip in their jeep this summer, the 5.7 hemi is your best bet.
For those looking for more off-road capabilities, there are higher-end models with bigger axles and limited-slip differentials that are specifically suited for trails. Of course, top-notch safety features can also be found on all of them as well. It’s safe to say that the Jeep Grand Cherokee is a strong choice no matter which model you choose, and each option can be equipped to suit your needs.
